Extend the life of the glass laser tube Several maintenance points are:

(1) The operating environment of the machine is better, the power supply voltage should be stable, if the voltage fluctuation is too large, configure the regulated power supply. The machine should be placed smoothly and can not work under the condition of large vibration and dampness.

(2) laser current can not be too large, must be below 20mA, and as far as possible to meet the engraving and speed

Under the conditions of small light intensity, 13-17mA is the more appropriate current range.

(3) laser tube is a heating element, we must ensure the quality and quantity of recycled water: Quality --- to ensure clean and free of debris,

To regularly replace the circulating water (two days), changing the water must be carried out when the machine does not work; amount --- to ensure adequate circulating water (20Kg above), to ensure that the circulating water temperature at 5-25 ℃.

(4) to meet the requirements of the work conditions, to take the most optimized way to maximize the work of the laser tube

Use life. For example, try to use more cutting methods.